You may not know, but this is one of a typical LED power supplies. Power supplies with LEDs are very important because they power up the LED lights. Correct installation of these power supplies is important for two reasons: Ensuring that they work perfectly, and keeping it all safe. So here is a step-by-step to how you can install an LED power supply — like our 24W EZY range for example- and make it toddler basic. Nanhai is here to help you.
How Important is a Proper Installation?
The proper installation of LED power supply is crucial. Today, we take a look at two key reasons as to why it is so significant — performance and safety.
Quality: An LED power supply typically considers quality as a measure of performance. Improper power supply: This can cause flickering lights to even unlit lamps in the rooms. When install improperly, this causes issues such as lights not illuminating at all or burning out the LED components permanently. Having the lights operate poorly can be incredibly annoying, so you must install them properly in order for a purpose.
Place: Proper installation install of safety is another major reason. Check for Secure Wires and Connections in Damp-Proof Covers Otherwise, they get zapped and when that happens it leads to a very unhealthy situation or even combustion. When you know how to install LED power supplies properly, it means that you are helping yourself and others.
Installing An LED Driver for LEDs
IDENTIFY YOUR POWER SUPPLY TYPE: sometimes it depends on which type of LED power supply and LED driver supply you have. It has two kinds which are constant voltage and constant current. Typically constant voltage power supplies are used for LED strips and constant current power supplies work with individual LEDs. Just ensure to get the correct one before installing it otherwise you will not install properly.
Step 1: Turn Off the Power — Before doing anything always turn-off your power. This is a basic safety act. As help, turn off the power to decrease your chances of getting shocked by electricity.
Pick The Right Place: Now you can look for an ideal place to keep the power supply. Store it where air can circulate around the packet, in a cool dry place So, make sure to keep the power supply away from paper such as cloth or other flammable materials because it is made of copper which a conductive metal. Also, avoid placing it where there's a lot of direct sunlight because too much heat can mess up your laptop.
Attach the Power Supply: Once a suitable location is found, screw or form brackets so that you can attach your power supply to this flat surface in order for it too to be fan cooled. It can be either a wall or panel So as it does not give way, and fall down.
Wire it Up: The next step is to wire On the (mains side), connect the AC input wires into the power supply. The ground wire, usually green or bare—make this connection first. Then you connect the live wire ( black, red) next and then, at last, the neutral of white or gray. You also want to be very careful that your wires are twisted on tightly and you wire nut them together.
Check the Lights – Restoring the power, check to see if your Christmas light installation is working correctly. They should be solid and consistent as well without flickering or dulling. In case that is not the same way it behaves in real life, then you might need to revisit your wiring and attempt trouble shooting so that i can know what went wrong.
HOW TO INSTALL LED POWER SUPPLIES
The following are some extra tips to get you through your installation:
Read Instructions – For any solution you buy, whether it is printed on an external box or found through a guide online. You can use this knowledge to know what you should do and not make mistakes.
Tool Up: Please ensure you are using the right tool on hand for the job at-hand. To install panel controllers you will need, wire strippers, screwdrivers pliers and crimping tools. The work is also easier, and risk reduction takes place when you have the proper equipment.
Mark Your Wires: This is a simple thing to do for keeping your wires identified. This can save you a lot of hassle later, trying to remember which wires go where and prevent confusion during the actual installation.
Manage wires, wire ties or cramps may be used to neatly arrange all the cables. This will keep tangling from happening, and also prevent the wires from being damaged.
Keep Distance: Ensure the power supply stays away from the LED lights. And keeping them that way may be part of what will make the LEDs like LED driver and power supply perform well and last long.
Stay Clear of Heat Sources: Keep the power supply away from any source of heat, like ovens, radiators and bulbs. Heat can result in scorching temperatures and possibly even fire hazards.
Utilize Waterproof or Weather-Resistant Supplies: If you are working outside and it is raining, then use waterproof power supplies. This is designed to prevent any damage done by your lights.